Canadian-run · Fitment measured, not guessedCap Concierge — we find your cap · jtt.imports@hotmail.com
Factory wheel center cap fitment — measured, not guessed.

Blog

Chevy Silverado & GMC Sierra Center Cap Size — the 83 mm OEM Caps

Four used Chevrolet truck center caps on concrete
Photo: eBay listing photo — Used GM truck caps — the 83 mm family (OEM 22837060 among them), sold as a set of four. Shop this fitment on eBay → Tap the photo to zoom.

If you own a 2014–2024 GM 1500 truck or full-size SUV, the center cap you're most likely shopping for is the 83 mm (3.25 in) OD cap — the one sold under OEM part numbers 22837060 and 20942002. It covers a big family: Chevrolet Silverado and Suburban, GMC Sierra and Yukon, and the Tahoe — and the Cadillac Escalade shares this same 83 mm GM truck cap family.

Why one cap covers so many trucks

GM built these trucks on shared wheel programs, so the same cap tooling serves the Silverado, Sierra, Tahoe, Yukon, Suburban and Escalade. That's good news for availability — this is one of the easiest OEM caps to find — but it doesn't make the size a guarantee. Wheel option and trim still matter, and aftermarket wheels change everything.

The number that is NOT your cap size: 78.1 mm

Search these trucks and you'll keep meeting 78.1 mm. That's the hub center bore of the 1999+ Silverado/Sierra 1500 (6×139.7 bolt pattern) — the hole that centers the wheel on the hub. It is not the cap diameter, and a cap ordered at 78.1 mm will not fit a wheel that takes the 83 mm cap. The two numbers describe different parts of the same wheel. (We break this confusion down fully in Center Bore vs Center Cap Diameter.)

Confirm before you order

  1. Pop one cap and read the back — a genuine cap carries its molded part number. 22837060 or 20942002 means you're in the 83 mm family.
  2. Caliper the face: you should see about 83 mm across the widest point.
  3. Measure across the clip tips on the back — the clip ID, not the face, is what actually locks the cap in.
Colorado owners: the midsize Colorado (2004–2012) is a different platform with a 99.5 mm hub bore. Don't assume the full-size trucks' cap crosses over — measure yours.

Full method: How to Measure Wheel Center Cap Size. All GM rows are charted in the Fitment Guide.

Related guides

Next steps

Run your numbers through the Cap Finder, or re-check them with the How to Measure walkthrough before you order.

Shop this fitment on eBay Cap Concierge — we find your cap

Disclosure: shopping links are plain eBay searches today; when our eBay Partner Network links activate, purchases through them may earn oemcentercaps.com a commission at no cost to you. Advertise on oemcentercaps.com

Sources: eBay OEM listings publishing full dimensions for part numbers 22837060 / 20942002; Amazon listing B0FC7XRBDM; hub bore data via nupi.nl wheel guide and wheeladaptersusa.com. Sizes published as commonly listed — verify by measuring.

WhatsApp us