Blog
Dodge Charger & Challenger Center Caps — the 63 mm Cap (6CZ27RXFAA)
For the modern muscle cars, the published cap is 63 mm: Charger and Challenger from 2017–2023 list an OEM-style cap under number 6CZ27RXFAA. As with every Mopar fitment, the wheel decides — trim-level wheels vary — but 63 mm and that part number are the documented starting point for the era.
Search the number, not the car
"Charger center cap" returns two decades of wheels. The full part number narrows the field to your era in one step, and the molding on the back of your old cap either confirms it or sends you to the caliper. Face finishes vary across trims; match yours in the listing photos after the number and the measurements agree.
The Dakota / Durango trap
Older Dodge trucks publish a tempting number — 71.5 mm for the 1991–2004 Dakota and Durango — but that's the hub center bore, the wheel-to-hub measurement, not a cap size. Ordering a 71.5 mm cap off a bore figure is the classic mix-up this site exists to prevent. Ram 1500 caps, meanwhile, are reported around 2.75″ (about 70 mm) for 17″ wheels and vary by wheel — measure-first territory, covered in the Ram brand notes.
Next steps
Run your numbers through the Cap Finder, or re-check them with the How to Measure walkthrough before you order.
Shop this fitment on eBay Cap Concierge — we find your cap
Disclosure: shopping links are plain eBay searches today; when our eBay Partner Network links activate, purchases through them may earn oemcentercaps.com a commission at no cost to you. Advertise on oemcentercaps.com
Related guides
- Center Bore vs Center Cap Diameter — the #1 Fitment Mistake
- Jeep Center Cap Sizes — 63–64 mm and the 55 mm Versions
- By Brand — the Dodge / Ram entry
Sources: accio.com marketplace listing (FARPREEY) for the 63 mm 6CZ27RXFAA-style cap, 2017–2023 Charger/Challenger; Dakota/Durango 71.5 mm bore via nupi.nl wheel guide. Sizes published as commonly listed — verify by measuring.